SCHEDULE 1 REGULATION 12 system strength and effectiveness (headgear only) are also provided, and the corresponding test methods are described. In addition, requirements for product marking and instructional literature are included. 2. Terminology Padding – that padding worn on the body and head. Headgear – that worn on the head by players. Shoulder Padding – that padding worn on the shoulder area. Breast Padding – that padding worn on the breast and axillary tail area. Zone of Coverage – the area of padding that is intended to provide coverage. Retention System – that which is used to secure the headgear or garment to the body. Chin Strap – a strap that passes under the wearer’s chin or lower jaw and is intended to retain the headgear on the head. g – the acceleration due to gravity. g (standard) = 9.80665 m/s2. gmax – the maximum value of g encountered during impact. 3. Requirements – Headgear 3.1 Ergonomics Headgear should be designed and constructed to minimise discomfort for the wearer. All normal playing movements shall not be impeded by wearing the headgear. 3.2 Construction 3.2.1 Construction Materials It is the manufacturer’s responsibility that all materials used in the construction of the headgear should not be significantly affected by ultraviolet radiation, water, dirt, perspiration, toiletries, household soaps and detergents. All materials coming into contact with the wearer’s body will not be of the type known to cause skin disorders and shall not cause abrasion of either the wearer or other players. 3.2.2 Padding Materials Padding materials must be homogeneous padding facing towards the wearer should be the same texture, hardness and density as that facing the opponent). Foam padding of sandwich construction is not allowed. 3.2.3 Finish Headgear shall be so constructed that it is unlikely to cause any injury to the wearer or other players during play. There shall not be hard or sharp Last update: 14 January, 2015 194
World Rugby Handbook
To see the actual publication please follow the link above