SCHEDULE 3 REGULATION 12 Figure 6(b): Fail Condition 5. Reporting 5.1 Images Photographic images of each Device prior to and post testing are taken. Images must be on a plain background and well lit. Sufficient images must be taken of the Device including at least a plan, elevation, end elevation, and detailed views of any failure that occurs. In addition, any data whether in table or graph form recorded during testing shall be reported. 5.2 Test Report The test results and all other required information shall be reported using the World Rugby Player Monitoring Device Testing Report. 6. Product Marking Devices shall be permanently marked with the following information by the manufacturer once compliance with this specification has been achieved: • Name or trademark of the manufacturer. • The World Rugby Approved logo, permanently visible on the Device. • Any other markings required by any applicable regulations in the territory of use. 7. Manufacturer’s declarations When submitting Devices for testing to testing institute, the manufacturer must provide a schematic of the Device design, including dimensions, with plan views of both sides of all assembly components for the casing and cross-sectional views along the length and width of the assembled casing. Last update: 3 January, 2017 254
World Rugby Handbook
To see the actual publication please follow the link above